ShoeFlex 9075A
The World’s First Filament Designed for Printing Shoes
ShoeFlex 9075A
ShoeFlex 9075A is the world’s first elastomer filament designed for shoe printing: it prints as fast and smoothly as TPU90A, while the finished parts reach the wearing comfort of TPU75A softness.
Compared with general TPU85A/75A — too soft to print, easy to stretch, high failure rate and wasted material — ShoeFlex 9075A delivers nearly 100% print success with stable printing and soft, flexible post-print parts, saving filament, time and energy.
Effortless printing in just two steps with a low-resistance roller bracket and the right machine parameters makes footwear R&D and try-on verification much easier.
Official Posters
Product Video
Key Features
Prints as Fast as TPU90A
Smooth, stable printing — no more difficult soft filaments
75A Finished Softness
Soft and flexible after printing for wearing comfort
100% Print Success
Stable printing, fewer rejects and reworks
Save Filament/Time/Energy
Efficient printing lowers total cost
Two-Step Easy Print
Low-resistance roller bracket + machine parameters, done
Technical Specifications
| Material | ShoeFlex 9075A elastomer filament (TPU) |
|---|---|
| Printing | Prints like TPU90A, finished softness 75A |
| Print Temp | 220-250 ℃ (other printers) |
| Max Volumetric Speed | 4-6 mm³/s (increases with temperature) |
| Bracket | Low-resistance roller bracket compatible |
| H2D Models | Use 95A parameters directly |
| P / X Series | Based on 95A: retraction 2mm, retraction speed 10mm/s |
| Important | Do not use AMS systems (flexible filament); caution with bed-moving models on tall prints |
Applications
Soles, insoles, protective gear, try-on samples and other elastomer products for footwear R&D and small-batch production.
